LANDSCAPE FORMS, a North American designer and manufacturer of premium site furniture, structure, LED lighting, and accessories, announces its status as a SITES® Community Partner and introduces an embodied carbon Life Cycle Analysis (LCA) initiative. These are two big steps toward providing the resources necessary to cultivate a culture of greater sustainability, accountability, and transparency. One of the first outdoor site furnishing manufacturers to conduct such an analysis, Landscape Forms is addressing an unmet need for this data in the landscape architecture industry while also setting a quantifiable baseline to inform new best practices. Visit www.landscapeforms.com.
EAST COAST LIGHTNING EQUIPMENT, INC. Lightning strikes are an awe-inspiring yet dangerous natural phenomenon. They don’t get the media attention that hurricanes, floods or tornadoes get, but thunderstorms are by far the severe weather phenomenon we encounter most frequently. Understanding the differences between lightning protection systems and surge suppression is vital for comprehensive protection against lightning’s myriad of threats. With ECLE’s high-quality, UL-listed lightning protection system components, lightning protection design and installation contractors can integrate lightning protection systems and surge suppression systems into protection strategies, ensuring the safety of structures as well as the invaluable electronic equipment housed within. Visit https://ecle.biz.
MOLEX introduces the MX60 series of contactless connectivity solutions. These low-power, high-speed, solid-state devices feature miniaturized mmWave RF transceivers and built-in antennas in one complete package for faster, simpler, device-to-device communications without physical cables or connectors. As a result, MX60 solutions offer greater product design freedom, seamless device pairing, and increased communications reliability for video displays, sleek and light consumer electronics, industrial robotics, and devices operating in harsh environments. Visit www.molex.com.
BELL & GOSSETT introduces the TECHNOFORCETM HVAC Package System, a turnkey, all-in-one HVAC stock skid system ready for immediate installation in commercial HVAC and pressure booster applications. Offered in 40 preconfigured standard stocked models that come fully assembled, the system consists of two to three e-1531 pumps, valves, and control drives. Most models will fit through a standard 36-inch doorway, making them ideal for retrofit or new construction. Flow ranges from approximately 200 to 3,400 GPM, designed to meet most HVAC heating and cooling requirements with flow split options ensuring system redundancy. Also equipped with sensorless system control, stainless steel grooved manifolds, and optional flanges to simplify installation. Visit https://bellgossett.com.
LEVITON introduces the Series 7000 Advanced 3-Phase Submeters, providing a versatile power metering solution for commercial and industrial applications, as well as the Series 7000 24-Circuit Advanced Branch Circuit Monitors, for high-density and branch circuit monitoring applications in both new construction and retrofit applications. The Series 7000 family is ideal for real-time power monitoring, energy allocation, energy management, load monitoring, code compliance, and tenant submetering. Facility managers can easily monitor current, voltage, instantaneous power, demand, and energy consumption of each monitored circuit with the new submeters. The series supports industry standard communications over RS485 and ethernet, including ModBus RTU, ModBus TCP, BACnet MS/TP, and BACnet IP for maximum flexibility. Visit www.leviton.com.
HEMCO’s stainless steel canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Canopies are available in wall or island models. Canopy hoods are fabricated of 16-gauge type 304 stainless steel with #4 satin finish. They can be wall-mounted or suspended from the ceiling over island locations. Optional side and rear panels prevent cross drafts to further improve airflow and reduce turbulence. Visit www.hemcocorp.com.
DMF LIGHTING’s DRD + M Series LED Modular Downlighting System features unique 4-inch housings – offered in round and square apertures – that install in nearly any building ceiling types including wood, concrete, and sloped ceilings. With over 50 interchangeable trim choices, a single housing can accommodate 98% of downlighting applications. The series features tool-less, field-changeable modules/light engines (downlight and adjustable), optics (from 15º to 90º+) and trims, fire-rated housings, precise lighting control with delivered lumens from 750 to 1500, and a lifetime of 50,000 hours. Offered in five color temperatures, allowing dimming from 3000K to 1800K, all while maintaining a consistent 93+ CRI. Visit www.dmflighting.com.
DURASEIN’s latest solid-surfaces sink is the Ansel, with a striking sense of depth and available in two colors. The solid surfaces are composed of two-thirds natural minerals and one-third high-performance acrylic resin and pigments, resulting in a “stone-like” material that can be shaped with standard woodworking tools. All surfaces are impact, scratch, heat, and fire resistant, as well as food-safe, non-toxic, non-porous, anti-bacterial, low VOC, and mold/mildew resistant. Durasein solid surface sinks and lavatories are certified by Home Innovation Research Labs and tested in accordance with CSA B45.5/IAPMO Z124. Visit www.zurn.com.
New Products listings are provided by the manufacturers and suppliers and selected by the editors for variety and innovation. For more information or to submit a New Products listing, email Gerry Van Treeck at [email protected].
